0086-0535-2358268
Gao Village, Shahe Town, Laizhou, Shandong, China (Mainland)
How to choose a horizontal mixer
At present, the rural farmers to choose vertical mixing equipment, but experts suggest that the scale of pig farms in the choice of feed processing equipment, should choose horizontal mixer, the equipment mixing efficiency, mixed quality, discharge time is short, the amount of residue less. But the choice and use of horizontal mixer should pay attention to the following points
China $ resin $ online at the beginning of 2009, pageviews exceeded 13,000 / day trips
1, according to the daily production of selected horizontal mixing machine. Due to the mixing machine for each batch of material processing time of about 6 minutes, plus the material and feed time, each batch of material processing time can be 10 minutes, then 1 hour can be processed 6 batch. If you choose a batch of 100 kg per batch of the mixer, then the processing of 600 kg per hour. Users can choose according to their own needs horizontal mixer.
2, according to the horizontal spiral belt mixer working principle, used to stir the mixed double helix in the opposite direction to push the material capacity should be basically the same. Since the pitch of the inner helical ribbon should be less than that of the outer helix, the pitch of the inner helical band should be smaller than that of the outer helix, and the width should be larger than that of the outer helix. Otherwise, the material will be concentrated in one direction. Therefore, in the choice of horizontal mixer to pay attention to this point.
3, according to the design principle, spiral belt mixer in the spiral belt and the gap between the shell can be 4 mm -10 mm, the material can be used to bring all the friction to participate in the mixing. However, due to crushing the particle size and material friction coefficient is not the same, so will make the various components of the material to participate in the mixing time is not the same, resulting in product non-uniformity. At present, some manufacturers have been aware of this and the product has been improved. One is to pay attention to the processing accuracy, so that the bottom gap reduced to 1 mm -2 mm; the other is the spindle and the shell made between the adjustable position, according to the amount of wear can be often adjusted between the spiral belt and shell Of the gap. When choosing a mixer, these two forms of product should be the best choice.
